How To Reset Water Filter Indicator On Samsung Refrigerator

The majority of Samsung refrigerators are equipped with filter light indications, which warning the user when the water filter needs to be changed.

It as well means that after replacing the filter in the Samsung refrigerator, you will need to reset the filter light in the appliance.

But why is this the case?

Generally speaking, the maximum number of months that a water filter tin exist used is half-dozen.

All the same, depending on the type of h2o that passes through the waterline, it may be necessary to replace the waterline.

Consider that if the water is hard in your area, y'all may need to replace the filter within 3 to 4 months of installing it.

Y'all will non be able to determine that your filter needs to exist inverse until you detect a divergence in flavor, which you would not notice without the filter low-cal.

Samsung DA29-00020B, HAF-CIN/EXP Premium Refrigerator Water Filter (White, 2 pack) — How to Reset Filter Lite on Samsung Fridge

The Performance of the Samsung Water Filter Indicator

When the water filter is still in good working order, the Samsung water filter displays a blue or green hue, depending on the model you have installed.

When it has been in the h2o for five months or 450 gallons, the color turns orangish or calorie-free pink.

This colour shift is oftentimes an indication that it is time to replace the water filter system.

Your h2o filter indicator will plough reddish after 6 months or 500 gallons of water take been used.

When you notice this red low-cal, information technology'southward time to supercede the water filter.

The longer you expect, the more likely it is that you will see particles in your drinking water.

Furthermore, you will need to change your water filter more frequently than every 6 months if you live in a region where at that place is excessive limescale in the h2o supply.

Filter indicator and ice type and filter change button are highlighted in blue from menu in the refrigerator

Indicator for the presence of a water filter

In society for the water filter indicator calorie-free to plow orange after v months or 450 gallons of h2o, and then ruby-red after six months or 500 gallons of water, it must first turn orange.

The color of the light depends on the model you accept. It might exist either green or blue.

Information technology is necessary to locate the multi-role push(south) on your display that controls the h2o filter indication in order to restore it to its default setting.

Then push and hold the button(s) for a few seconds until the light turns green.

Exemplifications of Various Models

NOTE:

The models depicted in the photographs below are only a few samples of a diverseness of designs.

You should examine the display screen on your refrigerator and seek characteristics that are comparable to these.

What you need to know about how to reset the filter light on a Samsung refrigerator (steps to follow on different models)

When using a Samsung refrigerator, you must concord downwardly the FILTER RESET push for approximately two seconds in order to plough off the red filter icon on the door.

If you are unable to locate the FILTER RESET button on your refrigerator – which is typically located on the dispenser controls – consult your owner's manual for assistance (on the front of your refrigerator).

In order to operate other models, you must press and hold downwards either the "WATER FILTER" button or the "ICE/H2o" button for iii seconds.

Now, because the Samsung refrigerator water filter reset technique differs from model to model, nosotros've explained the correct Samsung refrigerator water filter reset arroyo for each model in the following sections to help you get back on track (typical steps).

Samsung refrigerator model RF28K9070SR has a filter reset.

To reset the filter on your RF28K9070SR model, press and hold the ICE-MAKER button for approximately 3 seconds after turning information technology off.

The filter indication volition be reset as a result of this activeness.

Resetting the filter light on a Samsung model RF23J9011SG/AA – instructions

The CRUSHED/Concord button on your RF23J9011SG/AA must exist held down for three seconds in order to reset the water filter light.

The color of its indicator should transition from cherry to OFF instead of staying on.

Steps for resetting the h2o filter on a Samsung refrigerator with a French door pattern Samsung refrigerators, such every bit the Samsung refrigerator RF260/BEAESR/AA, are bachelor.

After installing a new water filter, press and hold downwards the ALARM/HOLD choice for three seconds to turn off the scarlet warning light that has shown.

Please keep in mind that, for devices with internal controls, you must push and hold downwardly the buttons Refrigerator+POWER Cool (at the same time) for a total of three seconds.

Model DA29-00003G of the Samsung refrigerator has a filter reset low-cal.

To reset a replacement alert lite, printing and hold the ALARM/Concur button for 3 seconds while the lite is off.

Model number RF24R7201SR/AA of the Samsung refrigerator.

If you have recently replaced the filter in your Samsung RF24R7201SR/AA refrigerator, pushing and property the FILTER RESET button (for iii seconds) should turn off the reset signal on the fridge.

Samsung refrigerator water filter reset RF28K9070SR/AA

The CRUSHED Water ice button must be pressed and held down for iii seconds in order to clear the water filter message.

RF23J9011SR is the Samsung refrigerator filter reset code.

If you have a Samsung refrigerator with model number RF23J9011SR, press and hold the push button "CRUSHED/Concord" for 3 seconds to reset the water filter warning.

RF263BEAESR is the Samsung fridge filter reset code.

The post-obit procedure should be followed if your RF263BEAESR Samsung refrigerator water filter does not reset automatically:

For iii seconds, printing and hold the Water ice Type/H2o button on the controller.

Instructions for resetting the Samsung RF28R7351SG water filter (applies for nearly 4 doors Samsung refrigerators)

The CRUSHED LIGHT INDICATOR button must be pressed and held down for three seconds in club to reset the alert signal.

If the reset lite signal does not plough off, there are some other options to attempt.

In a nutshell, if replacing a new filter did non result in the red light turning off, you tin also try the post-obit:

Check to see whether whatsoever of the buttons are locked.
Make sure that the buttons are truly "unlocked," or else the Samsung refrigerator filter reset operation will non function properly.

For the methods on how to unlock the controls, y'all tin refer to your handbook book again if you require them.

Ensure that the filter seating is right.

It is possible that the filter alarm light is all the same blinking because the newly installed filter was non properly placed. Open up the door, expect at the fitting, and make sure it'southward exactly in place.

Cheque to see that the proper filter was installed.
If you lot did not employ a legitimate production, the lite notification may not go away, and you may demand to swap out the replacement filter to get it to piece of work again (every bit a last resort).

OUR FINAL THOUGHTS

We promise yous have gained a better understanding of how to reset the filter calorie-free on a Samsung refrigerator (and probably you accept already gotten rid of the warning).

One last betoken to mention: virtually Samsung fridge models are equipped with a "LOCK" button, which is used to lock the controls, and it is frequently this button that is at a mistake when the Samsung fridge water filter light does not turn off when yous try to turn it off.

It will be necessary for you to unlock the controls in order for the water filter light to be successfully reset; thus, try to agree downwards the flashing LOCK button for three seconds and and then retry the procedure.

Naturally, the unlock technique varies from model to model, so if the steps outlined above do not work, consult your handbook for the right approach.

FREQUENTLY Enquire QUESTIONS

The filter calorie-free on my Samsung refrigerator won't turn off. What should I practise?

The bulk of the time, the technique to do a Samsung refrigerator water filter reset consists of pressing and property downwards either of these buttons for three seconds each.

The FILTER RESET button is located on the right-hand side of the screen.

The "WATER FILTER" push or the "ICE/Water" button are both available.

However, if your Samsung refrigerator filter calorie-free does not reset, outset bank check to come across if the buttons have been locked and then unlock them before attempting again.

What is the procedure for turning off the filter calorie-free on my Samsung?

It is necessary to locate the multi-function button(s) on your display that controls the water filter indication in guild to restore it to its default setting.

And then push and hold the button(due south) for a few seconds until the light turns green.

What is causing my Samsung refrigerator'southward filter lite to non reset?

If the light does not reset afterward several attempts, contact a professional to service the filtration system.

Once you have replaced the filter with a new one, the indicator light should return to its original blueish color and office properly.

The red filter indicator on your Samsung refrigerator will not turn off unless you reset it manually.

How-do-you-do, I'g Khelly! I am your tech expert for all your Samsung Products and Information needs. Life is complicated so, finding solution to your tech problems shouldn't be. Let me help y'all with that!????